Flip J_W by 180° and reroute PCB

Changes:
- Added Images and Erata
- Flip `J_W` by 180° and reroute PCB

README.md

@@ -2,6 +2,8 @@
 
 A set of modular PCBs that can be used to create a custom configuration for a Matrix Mixer.  A Matrix mixer allows you to mix you any input to any output at the same time.  
 
+![](images/final.jpg)
+
 If you have for example a 4x4 Matrix Mixer, you have 16 knobs with each controlling a how much of a given input signal (`1-4`) will be mixed into a given output (`A-D`):  
 
 ![](images/4x4-matrix.png)   
@@ -54,10 +56,11 @@ Provides two 3.5mm Mono output jacks, with a Jumper (or switch) each row of tile
 The summing section looks like this and allows a jumper (`J_ATT1` and `J_ATT2`) or a switch (2.54mm lead spacing) to be used to switch between unipolar and bipolar attenuation for each row seperately.  
 ![](images/schematic_summing.png)
 
-### Erata Output Module rev. 1.0 (fixed in 1.1)
+### Erata Output Module rev. 1.0 (has been fixed in 1.1)
 
 - Silkscreen for Vee and Vcc is swapped!
 - `R4` and `R8` should have a value of 100 Ω not 100 kΩ  (or bridge it with solder)
+- Connector `J_W` was flipped by 180° (this however depends on which side you want your outputs). Solve it like this (just make sure the silkscreen labels connect to the right bus): ![](images/bus-wiring.jpg) 
 
 # Panels
 

gerbers/MAMI-OUTPUT.gbs

@@ -49,14 +49,14 @@ X0Y23730000D03*
 D11*
 X-2540000Y23730000D03*
 D12*
-X-13730000Y2540000D03*
-D12*
-X-13730000Y-5080000D03*
-D12*
 X-13730000Y-2540000D03*
 D12*
 X-13730000Y5080000D03*
 D12*
+X-13730000Y2540000D03*
+D12*
+X-13730000Y-5080000D03*
+D12*
 X-13730000Y0D03*
 D11*
 X2540000Y-23730000D03*
@@ -65,17 +65,17 @@ X0Y-23730000D03*
 D11*
 X-2540000Y-23730000D03*
 D13*
-X13335000Y6985000D03*
-D13*
-X13335000Y4445000D03*
-D13*
-X13335000Y1905000D03*
-D13*
 X13335000Y-1905000D03*
 D13*
 X13335000Y-4445000D03*
 D13*
 X13335000Y-6985000D03*
+D13*
+X13335000Y6985000D03*
+D13*
+X13335000Y4445000D03*
+D13*
+X13335000Y1905000D03*
 D14*
 X4920000Y-12500000D03*
 D15*
@@ -93,45 +93,43 @@ X-3380000Y12500000D03*
 D14*
 X-5980000Y12500000D03*
 D16*
-X2127250Y-6032500D03*
-D16*
-X222250Y-6032500D03*
+X-3492500Y-3810000D03*
 D16*
-X7798486Y-813486D03*
+X2127250Y2857500D03*
 D16*
-X-6032500Y-6032500D03*
+X2222500Y-9207500D03*
 D16*
-X6667500Y-317500D03*
+X222250Y2857500D03*
 D16*
-X2857500Y-9842500D03*
+X-6032500Y2857500D03*
 D16*
-X4127500Y-5080000D03*
+X6667500Y8572500D03*
 D16*
-X-6032500Y952500D03*
+X4127500Y3810000D03*
 D16*
-X2540000Y8890000D03*
+X-6032500Y-7937500D03*
 D16*
-X2540000Y7620000D03*
+X-2222500Y-9207500D03*
 D16*
-X-1905000Y-9842500D03*
+X-3492500Y-5715000D03*
 D16*
-X-1905000Y8890000D03*
+X2159000Y-5080000D03*
 D16*
-X-3492500Y3175000D03*
+X6667500Y-2540000D03*
 D16*
-X6667500Y6350000D03*
+X5397500Y-8572500D03*
 D16*
-X-1905000Y7620000D03*
+X0Y8255000D03*
 D16*
-X0Y-635000D03*
+X-1905000Y8255000D03*
 D16*
-X-1905000Y-635000D03*
+X-3492500Y5080000D03*
 D16*
-X7035119Y-3961386D03*
+X4127500Y-6985000D03*
 D16*
-X-3492500Y-3810000D03*
+X-1905000Y9842500D03*
 D16*
-X4127500Y1905000D03*
+X5715000Y-6667500D03*
 D16*
-X6985000Y3175000D03*
+X3175000Y9842500D03*
 M02*

gerbers/MAMI-OUTPUT.gtp

@@ -25,83 +25,83 @@ G01*
 %LPD*%
 G75*
 D10*
-X5715000Y-5712500D03*
+X5715000Y3177500D03*
 D10*
-X5715000Y-3812500D03*
+X5715000Y5077500D03*
 D11*
-X8255000Y3172500D03*
+X8255000Y-5717500D03*
 D11*
-X8255000Y1272500D03*
+X8255000Y-7617500D03*
 D10*
 X9842500Y10480000D03*
 D10*
 X9842500Y12380000D03*
 D10*
-X-5080000Y-2537500D03*
+X-5080000Y6352500D03*
 D10*
-X-5080000Y-637500D03*
+X-5080000Y8252500D03*
 D11*
-X5715000Y3172500D03*
+X5715000Y-5717500D03*
 D11*
-X5715000Y1272500D03*
+X5715000Y-7617500D03*
 D10*
 X7620000Y10480000D03*
 D10*
 X7620000Y12380000D03*
 D11*
-X10795000Y3172500D03*
+X10795000Y-5717500D03*
 D11*
-X10795000Y1272500D03*
+X10795000Y-7617500D03*
 D12*
-X-2382500Y-2540000D03*
+X-2382500Y6350000D03*
 D12*
-X-2382500Y-5080000D03*
+X-2382500Y3810000D03*
 D13*
-X3017500Y-2540000D03*
+X3017500Y6350000D03*
 D12*
-X-2382500Y-1270000D03*
+X-2382500Y7620000D03*
 D12*
-X-2382500Y-3810000D03*
+X-2382500Y5080000D03*
 D13*
-X3017500Y-5080000D03*
+X3017500Y3810000D03*
 D13*
-X3017500Y-3810000D03*
+X3017500Y5080000D03*
 D13*
-X3017500Y-1270000D03*
+X3017500Y7620000D03*
 D10*
-X-5080000Y4447500D03*
+X-5080000Y-4442500D03*
 D10*
-X-5080000Y6347500D03*
+X-5080000Y-2542500D03*
 D12*
-X-2382500Y4445000D03*
+X-2382500Y-4445000D03*
 D12*
-X-2382500Y1905000D03*
+X-2382500Y-6985000D03*
 D13*
-X3017500Y4445000D03*
+X3017500Y-4445000D03*
 D12*
-X-2382500Y5715000D03*
+X-2382500Y-3175000D03*
 D12*
-X-2382500Y3175000D03*
+X-2382500Y-5715000D03*
 D13*
-X3017500Y1905000D03*
+X3017500Y-6985000D03*
 D13*
-X3017500Y3175000D03*
+X3017500Y-5715000D03*
 D13*
-X3017500Y5715000D03*
+X3017500Y-3175000D03*
 D14*
-X6625000Y-1270002D03*
+X6625000Y7619998D03*
 D14*
-X5125000Y-1270002D03*
+X5125000Y7619998D03*
 D14*
-X-4490000Y-5080002D03*
+X-4490000Y3809998D03*
 D14*
-X-5990000Y-5080002D03*
+X-5990000Y3809998D03*
 D14*
-X6625000Y5714998D03*
+X6625000Y-3175002D03*
 D14*
-X5125000Y5714998D03*
+X5125000Y-3175002D03*
 D14*
-X-4490000Y1904998D03*
+X-4490000Y-6985002D03*
 D14*
-X-5990000Y1904998D03*
+X-5990000Y-6985002D03*
 M02*

gerbers/MAMI-OUTPUT.gts

@@ -63,9 +63,9 @@ X-12000000Y22000000D03*
 D10*
 X12000000Y-22000000D03*
 D11*
-X5715000Y-5712500D03*
+X5715000Y3177500D03*
 D11*
-X5715000Y-3812500D03*
+X5715000Y5077500D03*
 D12*
 X2540000Y23730000D03*
 D12*
@@ -73,18 +73,18 @@ X0Y23730000D03*
 D12*
 X-2540000Y23730000D03*
 D13*
-X8255000Y3172500D03*
+X8255000Y-5717500D03*
 D13*
-X8255000Y1272500D03*
-D14*
-X-13730000Y2540000D03*
-D14*
-X-13730000Y-5080000D03*
+X8255000Y-7617500D03*
 D14*
 X-13730000Y-2540000D03*
 D14*
 X-13730000Y5080000D03*
 D14*
+X-13730000Y2540000D03*
+D14*
+X-13730000Y-5080000D03*
+D14*
 X-13730000Y0D03*
 D11*
 X9842500Y10480000D03*
@@ -97,73 +97,73 @@ X0Y-23730000D03*
 D12*
 X-2540000Y-23730000D03*
 D11*
-X-5080000Y-2537500D03*
+X-5080000Y6352500D03*
 D11*
-X-5080000Y-637500D03*
+X-5080000Y8252500D03*
 D13*
-X5715000Y3172500D03*
+X5715000Y-5717500D03*
 D13*
-X5715000Y1272500D03*
+X5715000Y-7617500D03*
 D11*
 X7620000Y10480000D03*
 D11*
 X7620000Y12380000D03*
 D13*
-X10795000Y3172500D03*
+X10795000Y-5717500D03*
 D13*
-X10795000Y1272500D03*
-D15*
-X13335000Y6985000D03*
-D15*
-X13335000Y4445000D03*
-D15*
-X13335000Y1905000D03*
+X10795000Y-7617500D03*
 D15*
 X13335000Y-1905000D03*
 D15*
 X13335000Y-4445000D03*
 D15*
 X13335000Y-6985000D03*
+D15*
+X13335000Y6985000D03*
+D15*
+X13335000Y4445000D03*
+D15*
+X13335000Y1905000D03*
 D16*
-X-2382500Y-2540000D03*
+X-2382500Y6350000D03*
 D16*
-X-2382500Y-5080000D03*
+X-2382500Y3810000D03*
 D17*
-X3017500Y-2540000D03*
+X3017500Y6350000D03*
 D16*
-X-2382500Y-1270000D03*
+X-2382500Y7620000D03*
 D16*
-X-2382500Y-3810000D03*
+X-2382500Y5080000D03*
 D17*
-X3017500Y-5080000D03*
+X3017500Y3810000D03*
 D17*
-X3017500Y-3810000D03*
+X3017500Y5080000D03*
 D17*
-X3017500Y-1270000D03*
+X3017500Y7620000D03*
 D11*
-X-5080000Y4447500D03*
+X-5080000Y-4442500D03*
 D11*
-X-5080000Y6347500D03*
+X-5080000Y-2542500D03*
 D16*
-X-2382500Y4445000D03*
+X-2382500Y-4445000D03*
 D16*
-X-2382500Y1905000D03*
+X-2382500Y-6985000D03*
 D17*
-X3017500Y4445000D03*
+X3017500Y-4445000D03*
 D16*
-X-2382500Y5715000D03*
+X-2382500Y-3175000D03*
 D16*
-X-2382500Y3175000D03*
+X-2382500Y-5715000D03*
 D17*
-X3017500Y1905000D03*
+X3017500Y-6985000D03*
 D17*
-X3017500Y3175000D03*
+X3017500Y-5715000D03*
 D17*
-X3017500Y5715000D03*
+X3017500Y-3175000D03*
 D18*
-X6625000Y-1270002D03*
+X6625000Y7619998D03*
 D18*
-X5125000Y-1270002D03*
+X5125000Y7619998D03*
 D19*
 X4920000Y-12500000D03*
 D20*
@@ -173,17 +173,17 @@ X-3380000Y-12500000D03*
 D19*
 X-5980000Y-12500000D03*
 D18*
-X-4490000Y-5080002D03*
+X-4490000Y3809998D03*
 D18*
-X-5990000Y-5080002D03*
+X-5990000Y3809998D03*
 D18*
-X6625000Y5714998D03*
+X6625000Y-3175002D03*
 D18*
-X5125000Y5714998D03*
+X5125000Y-3175002D03*
 D18*
-X-4490000Y1904998D03*
+X-4490000Y-6985002D03*
 D18*
-X-5990000Y1904998D03*
+X-5990000Y-6985002D03*
 D19*
 X4920000Y12500000D03*
 D20*
@@ -193,45 +193,43 @@ X-3380000Y12500000D03*
 D19*
 X-5980000Y12500000D03*
 D21*
-X2127250Y-6032500D03*
-D21*
-X222250Y-6032500D03*
+X-3492500Y-3810000D03*
 D21*
-X7798486Y-813486D03*
+X2127250Y2857500D03*
 D21*
-X-6032500Y-6032500D03*
+X2222500Y-9207500D03*
 D21*
-X6667500Y-317500D03*
+X222250Y2857500D03*
 D21*
-X2857500Y-9842500D03*
+X-6032500Y2857500D03*
 D21*
-X4127500Y-5080000D03*
+X6667500Y8572500D03*
 D21*
-X-6032500Y952500D03*
+X4127500Y3810000D03*
 D21*
-X2540000Y8890000D03*
+X-6032500Y-7937500D03*
 D21*
-X2540000Y7620000D03*
+X-2222500Y-9207500D03*
 D21*
-X-1905000Y-9842500D03*
+X-3492500Y-5715000D03*
 D21*
-X-1905000Y8890000D03*
+X2159000Y-5080000D03*
 D21*
-X-3492500Y3175000D03*
+X6667500Y-2540000D03*
 D21*
-X6667500Y6350000D03*
+X5397500Y-8572500D03*
 D21*
-X-1905000Y7620000D03*
+X0Y8255000D03*
 D21*
-X0Y-635000D03*
+X-1905000Y8255000D03*
 D21*
-X-1905000Y-635000D03*
+X-3492500Y5080000D03*
 D21*
-X7035119Y-3961386D03*
+X4127500Y-6985000D03*
 D21*
-X-3492500Y-3810000D03*
+X-1905000Y9842500D03*
 D21*
-X4127500Y1905000D03*
+X5715000Y-6667500D03*
 D21*
-X6985000Y3175000D03*
+X3175000Y9842500D03*
 M02*

gerbers/MAMI-OUTPUT.txt

@@ -10,27 +10,26 @@ G90
 G05
 M71
 T4
-X2.127Y-6.032
-X0.222Y-6.032
-X7.798Y-0.813
-X-6.032Y-6.032
-X6.668Y-0.318
-X2.857Y-9.842
-X4.128Y-5.080
-X-6.032Y0.953
-X2.540Y8.890
-X2.540Y7.620
-X-1.905Y-9.842
-X-1.905Y8.890
-X-3.493Y3.175
-X6.668Y6.350
-X-1.905Y7.620
-X0.000Y-0.635
-X-1.905Y-0.635
-X7.035Y-3.961
 X-3.493Y-3.810
-X4.128Y1.905
-X6.985Y3.175
+X2.127Y2.857
+X2.223Y-9.207
+X0.222Y2.857
+X-6.032Y2.857
+X6.668Y8.572
+X4.128Y3.810
+X-6.032Y-7.938
+X-2.223Y-9.207
+X-3.493Y-5.715
+X2.159Y-5.080
+X6.668Y-2.540
+X5.397Y-8.572
+X0.000Y8.255
+X-1.905Y8.255
+X-3.493Y5.080
+X4.128Y-6.985
+X-1.905Y9.842
+X5.715Y-6.668
+X3.175Y9.842
 T3
 X4.920Y-12.000G85X4.920Y-13.000
 X-3.380Y-12.000G85X-3.380Y-13.000
@@ -42,20 +41,20 @@ T2
 X2.540Y23.730
 X0.000Y23.730
 X-2.540Y23.730
-X-13.730Y2.540
-X-13.730Y-5.080
 X-13.730Y-2.540
 X-13.730Y5.080
+X-13.730Y2.540
+X-13.730Y-5.080
 X-13.730Y0.000
 X2.540Y-23.730
 X0.000Y-23.730
 X-2.540Y-23.730
-X13.335Y6.985
-X13.335Y4.445
-X13.335Y1.905
 X13.335Y-1.905
 X13.335Y-4.445
 X13.335Y-6.985
+X13.335Y6.985
+X13.335Y4.445
+X13.335Y1.905
 T1
 X-12.000Y-22.000
 X12.000Y22.000