Skip to content
Snippets Groups Projects
README.md 1.7 KiB
Newer Older
  • Learn to ignore specific revisions
  • # Simplecase
    
    
    David Huss's avatar
    David Huss committed
    The most simple implementation of a eurorack case possible. For details to single parts read the [diy case wiki entry](https://code.hfbk.net/t6/sdiy/wikis/diy-case)
    
    David Huss's avatar
    David Huss committed
    This uses:
    - 85HP rails from Reichelt
    - A 65 Watt Meanwell RT-65B powersupply
    - A Clicks & Clocks Busboard without 5V option
    
    
    David Huss's avatar
    David Huss committed
    ## One row
    ### Pictures
    
    David Huss's avatar
    David Huss committed
    ![Simplecase view](simplecase/simplecase_persp.png)  
    
    The simplecase consists of 5 case parts:  
    ![Simplecase Exploded view](simplecase/simplecase_exploded_anotated.png)
    
    
    David Huss's avatar
    David Huss committed
    ### Size
    
    David Huss's avatar
    David Huss committed
    All units in Milimeters (mm)  
    Choose the thickness to your taste  
    The depth of 150mm allows to use average modules in the vicinity of the powersupply. If you wanna go for something less deep check yourself how much space would be left. If you wanna go deeper change the 150mm for the parts Top/Bottom and Side to the desired value. Note that this is the INSIDE depth.
      
    | Name | Amount | Length | Width |
    | ---- | ------ | ------ | ----- |
    | Back | 1 | 432 + 2×Thickness | 133 + 2×Thickness |
    | Top/Bottom | 2 | 432 + 2×Thickness | 150 |
    
    David Huss's avatar
    David Huss committed
    | Sides | 2 | 133 | 150 |
    
    ## Two Rows
    
    David Huss's avatar
    David Huss committed
    ### Pictures
    
    David Huss's avatar
    David Huss committed
    ![Simplecase view](simplecase/simplecase_two_rows.png)  
    
    David Huss's avatar
    David Huss committed
    
    ### Size
    All units in Milimeters (mm)  
    Choose the thickness to your taste
    The depth of 150mm allows to use average modules in the vicinity of the powersupply. If you wanna go for something less deep check yourself how much space would be left. If you wanna go deeper change the 150mm for the parts Top/Bottom and Side to the desired value. Note that this is the INSIDE depth.
      
    | Name | Amount | Length | Width |
    | ---- | ------ | ------ | ----- |
    | Back | 1 | 432 + 2×Thickness | 266 + 2×Thickness |
    | Top/Bottom | 2 | 432 + 2×Thickness | 150 |
    | Sides | 2 | 266 | 150 |