Commit bc9f5d56 authored by David Huss's avatar David Huss 💬

Explain BAT-42 orientation

parent 978bdf65
......@@ -17,9 +17,10 @@ The circuit works as a simple inverting summing stage with another inverting amp
Avoid mistakes here at all cost! Be careful and take your time, especially for the traces between the legs of the potentiometers! Do not try to be fast here, it will bite you later on! Make sure to get the positions of the parts exactly right – otherwise things might not work and you have to figure out a panel layout yourself!
<img src="images/scratch_away_parts.png" height="800px" width="auto" />
Also:
- Drill 2mm holes for the mechanical legs of the potentiometers
- Make sure to get the orientation of the Diodes (BAT-42), the big electrolytic capacitors and the socket for the chip right (leave the chip out of the socket until the end)
- Make sure to get the orientation of the Diodes (BAT-42, orange in the picture – the stripe is up), the big electrolytic capacitors and the socket for the chip right (leave the chip out of the socket until the end)
- Make sure to solder the 2x5 pin power header (on bottom) last
- Keep the clipped away legs for later
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment