@@ -12,3 +12,12 @@ A 3Watt ±12V Power Supply based on the [Meanwell DCWN03E-12](https://www.meanwe
| ---- | ---- |
|  |  |
## Erata (rev 1.0)
- The `GND` of the USB is connected to the `COM` of the ±12V side and it shouldn't. Cut the GND plane like so: 
- The USB-Connector Pinout was created wrongly (fixed now). Fix this by either:
- Using a flipped USB-Connector like the `10103592-0001LF` by Amphenol FCI
- Cutting the top traces leading from the connector to the Meanwell block, scratch them up and solder a crossed wire to the bottom like so: 