Changes

Page history
t6 created page: documentation authored by David Huss's avatar David Huss
Hide whitespace changes
Inline Side-by-side
documentation.md
View page @ 3f1a5680
...@@ -16,8 +16,8 @@ th 555 vco diy expo) ...@@ -16,8 +16,8 @@ th 555 vco diy expo)
- [ ] BOM: R6 is 2.4M we only have 2.2M how to proceed? - [ ] BOM: R6 is 2.4M we only have 2.2M how to proceed?
## 2017-03-30 Build Notes ## 2017-03-30 Build Notes
1. Take Components PCB 1. Split PCBs with a cutter and the edge of a table. Do not attemp to break it appart without putting it to an edge!
2. solder all 10k resistors (6 pieces) in. Careful not to confuse them with 18k! 2. On components PCB: solder all 10k resistors (6 pieces) in. Careful not to confuse them with 18k!
3. solder all 18k resistors (2 pieces) in. Careful not to confuse them with 10k! 3. solder all 18k resistors (2 pieces) in. Careful not to confuse them with 10k!
4. solder all 12k resistors (2 pieces) in. 4. solder all 12k resistors (2 pieces) in.
5. solder all 2.2k resistors (3 pieces) in. Do not confuse with 2.2m or 22k! 5. solder all 2.2k resistors (3 pieces) in. Do not confuse with 2.2m or 22k!
...@@ -59,8 +59,8 @@ th 555 vco diy expo) ...@@ -59,8 +59,8 @@ th 555 vco diy expo)
40. solder R11 with 1M 40. solder R11 with 1M
41. solder R6 with 2.4M (or 2.2M if no 2.4M available) 41. solder R6 with 2.4M (or 2.2M if no 2.4M available)
42. solder R35 with 330k 42. solder R35 with 330k
43. solder R32 with 3k 43. solder R32 with 1.8k
44. solder R33 with 1.8k 44. solder R33 with 3k
45. solder C2POTS with 220nF 45. solder C2POTS with 220nF
46. Do not solder: push in the green pots (except PWM_CV) 46. Do not solder: push in the green pots (except PWM_CV)
47. Do not solder: push in the Jacks 47. Do not solder: push in the Jacks
... ...
......