documentation.md

@@ -16,8 +16,8 @@ th 555 vco diy expo)
 - [ ] BOM: R6 is 2.4M we only have 2.2M how to proceed?
 
 ## 2017-03-30 Build Notes
-1. Take Components PCB
-2. solder all 10k resistors (6 pieces) in. Careful not to confuse them with 18k!
+1. Split PCBs with a cutter and the edge of a table. Do not attemp to break it appart without putting it to an edge!
+2. On components PCB: solder all 10k resistors (6 pieces) in. Careful not to confuse them with 18k!
 3. solder all 18k resistors (2 pieces) in. Careful not to confuse them with 10k!
 4. solder all 12k resistors (2 pieces) in.
 5. solder all 2.2k resistors (3 pieces) in. Do not confuse with 2.2m or 22k!
@@ -59,8 +59,8 @@ th 555 vco diy expo)
 40. solder R11 with 1M
 41. solder R6 with 2.4M (or 2.2M if no 2.4M available)
 42. solder R35 with 330k
-43. solder R32 with 3k
-44. solder R33 with 1.8k
+43. solder R32 with 1.8k
+44. solder R33 with 3k
 45. solder C2POTS with 220nF
 46. Do not solder: push in the green pots (except PWM_CV)
 47. Do not solder: push in the Jacks