sdiy issueshttps://code.hfbk.net/groups/sdiy/-/issues2024-02-20T12:39:53Zhttps://code.hfbk.net/sdiy/daisyy/daisyy-hardware/-/issues/1Issues with the RGB-LED2024-02-20T12:39:53ZDavid Hussdavid.huss@hfbk-hamburg.deIssues with the RGB-LEDThere are some issues with the RGB-LED
| Issue | Fix |
| ----- | --- |
| The RGB-LED is on the wrong side of the PCB | Flip it around, make sure the Pinout of the traces is swapped to represent this! |
| The pins of the RGB-LED are too ...There are some issues with the RGB-LED
| Issue | Fix |
| ----- | --- |
| The RGB-LED is on the wrong side of the PCB | Flip it around, make sure the Pinout of the traces is swapped to represent this! |
| The pins of the RGB-LED are too close to each other | Create an alternative footprint |
| The square pin is hard to recognize | Add a indicator to the silkscreen manually or add it to the alternative footprint |David Hussdavid.huss@hfbk-hamburg.deDavid Hussdavid.huss@hfbk-hamburg.dehttps://code.hfbk.net/sdiy/daisyy/daisyy-hardware/-/issues/2Solderability of Solder bridge2024-02-20T12:39:53ZDavid Hussdavid.huss@hfbk-hamburg.deSolderability of Solder bridgeThe solder bridge bridging `AGND` and `DGND` is hard to solder. Make this either a wire bridge or ensure the solder stop is removed between those.The solder bridge bridging `AGND` and `DGND` is hard to solder. Make this either a wire bridge or ensure the solder stop is removed between those.David Hussdavid.huss@hfbk-hamburg.deDavid Hussdavid.huss@hfbk-hamburg.dehttps://code.hfbk.net/sdiy/daisyy/daisyy-hardware/-/issues/4Solderability considerations2024-02-20T12:39:53ZDavid Hussdavid.huss@hfbk-hamburg.deSolderability considerations- [ ] Make `R4` (Input Gain 1) horizontal
- [ ] Add more space for `R1` (Input Gain 2)
- [ ] Add more space between `U1` and `C3`
- [ ] Alternate footprint for Cherry MX to make straight positioning easier?- [ ] Make `R4` (Input Gain 1) horizontal
- [ ] Add more space for `R1` (Input Gain 2)
- [ ] Add more space between `U1` and `C3`
- [ ] Alternate footprint for Cherry MX to make straight positioning easier?David Hussdavid.huss@hfbk-hamburg.deDavid Hussdavid.huss@hfbk-hamburg.de